How to Clean a Bong it’s important to do it correctly

Cleaning a bong can be difficult. When you’re trying to clean your bong, you need to make sure that you’re using the right materials. You want to make sure that you use something that will be able to remove any tar that has built up over time, or that will be able to prevent a buildup from happening in the first place. This can be done by using some salt or alcohol. Or you could try to use some boiling water.

Table content



3.Boiling water

4.Dishwasher method


6.Lemon juice


When you have a bong, you will want to clean it periodically. The most common way is to soak it in an alcohol and salt mixture. This will get rid of any residue that has built up in your bong over time. But, you can also use other cleaners.

You can use a bottle brush or pipe cleaner to scrub the interior of the bong. This will help to remove residue from any hard-to-reach spots.

You can also soak the inside of the bong in a mixture of water, dish soap, and acetone. A rubbing alcohol and salt mixture is another popular way to clean a bong.

Before you begin

  •  you should empty your bong. If you have a bong with multiple parts, you should empty it into a separate container. Make sure you have a zip-lock bag on hand. Once you have filled it with the cleaning solution, shake the bag a couple times to make sure the solution is dispersed in all the chambers.
  • The next step is to rinse the bong thoroughly. After rinsing it with clean water, you should cover the mouthpiece with a dish towel and set it aside to dry.
  • If you do not have a zip-lock bag, you can simply throw your old alcohol and salt mixture in a trash can. Or you can leave the solution in the bong for at least 30 minutes.


If you’re looking for a way to clean your bong without the hassle of boiling it, here’s a great tip. Salt can be used as an abrasive to scrub out resin buildup. It’s also soft enough not to scratch the glass.

To keep your bong in good condition, you should clean it at least once a week. Keeping it clean prevents it from getting mold and fungi. This will also make it a safer smoke.

The first step

  •  to cleaning a bong is to empty the bowl. You can use a bottle brush to clean the inside. Also, use a pipe cleaner to wipe out any residue in hard to reach areas.
  • Next, place the downstem into a separate container. You can also buy standard rubber stoppers for the mouthpiece. Just make sure the size of the opening is equal to the size of the downstem.
  • Finally, you’ll want to fill the bong with a mixture of salt and alcohol. Mixing alcohol and salt will help to cut through sticky resin.
  • Once the mixture is mixed, you’ll need to let the mixture soak for about 10 minutes. After this, you should give the solution a good shake.
  • Lastly, rinse off the bong. Rinse with warm water. Remember to wash out the downstem, bowl, and mouthpiece.
  • Another method is to add lemon juice to the water. Lemon scent masks any lingering smells.

Boiling water

Cleaning a bong is an important step to keep your device smelling and tasting good. It is best to clean a bong after each use. If it is not cleaned, the impurities can build up and create a stinky mess. You will also run the risk of ingesting bacteria and other harmful pathogens.

There are several common cleaning methods

  • such as scrubbing the glass with warm water or lemon juice. These methods are simple and effective. However, they are not always as safe as others.
  • Boiling water is another way to clean a bong. This method is particularly useful for cleaning the bowl and stem. When done correctly, you will remove the gunk and grime that are stuck in the bowl.
  • While boiling water may be the easiest way to clean a bong, it is a delicate process. For this reason, it is advisable to use water that is purified and filtered before adding it.
  • Another effective cleaning method is scrubbing the parts with alcohol and salt. This method is relatively inexpensive and will remove the most grunge. Using a bottle brush is also a good idea.
  • Some people believe that lemon juice can be used to clean a bong. The lemon juice will help break down resin and prevent a gunky mess. But it will also kill that foul-smelling bong water smell.
  • When cleaning a bong, make sure to rinse it thoroughly. This is to avoid spreading any bacteria and to prevent the onset of fungi.
Dishwasher method

It’s not a good idea to clean bongs in the dishwasher. You may end up damaging the bong or even ruining the pipe if you don’t use the proper techniques. If you’re looking to avoid this hazard, there are some easy steps you can take.

The first step

  •  is to rinse the bong. This will prevent the bacteria from accumulating. However, the water should not be poured down the drain. Instead, it can be disposed of in a sealed container.
  • After the cleaning process is completed, you can place the pieces in the top rack of the dishwasher. Don’t forget to remove the downstem and bowl. A separate bag can be used to store these items, as they can get damaged by the dishwasher.
  • Some people have tried to clean their bong in the dishwasher. Others have been too lazy to do it regularly. Regardless, there are plenty of shortcuts you can use to ensure that your bongs are kept in tip-top shape.
  • There are several commercial cleaning products on the market. These are designed to make the job faster and easier. They can also help remove stubborn bits of dirt and resin.
  • Another alternative is to try your hand at a homemade solution. Using a mixture of rubbing alcohol and salt is a great way to get a smooth, clear surface. But it might not be the cheapest option.

The best way to clean a bong is to use a mixture of rubbing alcohol and salt. This combination is a common household item, and will remove resin buildup from the bong.

Before using the solution, make sure the pipe is watertight. Make sure you wear safety goggles when handling the cleaning agent. After pouring the mixture into the pipe, wait for at least an hour for the solution to react.

When you are finished cleaning

  • rinse the piece thoroughly with warm water. It is important to be careful with the cleaning liquid, as it may contain chemicals that could irritate the skin or eyes.
  • If you don’t want to use a mixture of rubbing alcohol, you can also clean the bong with a mixture of warm water and salt. Alternatively, you can try a commercial cleaning product, such as 420 Solution.
  • Acetone is another type of cleaning liquid, and you can find it at your local store. Acetone is not as dangerous as alcohol, but it is flammable. Also, it releases vapors that can cause dizziness and inflammation of the throat and eyes.
  • Another method for cleaning a bong is by boiling water. However, this process is risky. In addition to the risk of burning the bong, it can damage the glass.
  • Another cleaning liquid that can be used to clean a bong is hydrogen peroxide. The 3% solution is recommended for home use, but you must wear protective gloves when working with it.

Lemon juice

Cleaning bongs is not a particularly complicated process. The objective is to get rid of grime and gunk, and the most effective means of doing so is with lemon juice. Using this product will keep your bong looking clean and smelling fresh.

One way to clean a bong is to pour hot water in, shake it, and then rinse with cool water. This will remove gross resin and gunk. Another option is to fill the bong with hot water and lemon juice, let it sit for a few minutes, and then rinse it with hot water.

For more serious cleaning

  •  you can also use vinegar or baking soda to help clean your bong. These solutions are mild acids, but they don’t have the cleaning power of rubbing alcohol.
  • If you’re a casual smoker, you should clean your bong after each session. You can also use a pipe cleaner to help clean the nooks and crannies of your bong.
  • If you’re a heavy user, you can use 91% or 99% isopropyl alcohol to clean your bong. Depending on the type of resin you’re cleaning, this alcohol may work better than others.
  • To clean your bong, you’ll need to use the right method. There are a few options for cleaning your bong, but it’s best to start with the most basic. Getting your bong to a clean state is similar to cleaning a pizza plate. It involves cleaning the main part of the bong, rinsing the parts that got dirty, and then air drying it.


When it comes to cleaning bongs, it’s important to do it correctly. The right approach will not only clean your bong, but also protect the materials from damage.

There are a number of different cleaning techniques, so choose the one that works for you. One of the most popular methods is solvent based. This method uses 99% Isopropyl alcohol to dissolve the sticky weed resin. Once dissolved, the residue is easy to remove.

Another good way to clean your bong is with a squirt of lemon juice. Lemon juice can help to remove the gunk that’s been built up on the inside of the bong. It’s also a good idea to drain your bong.